Top notch universal SLI/Crossfire fitting/pipe kit to connect two graphics cards with 2 slot space without having to hassle with hose!
It can be difficult and cumbersome to mount the hose between 2 graphics cards that sits in SLI/Crossfire as the tubing should not be too short or too long, as this pulls or pushes the graphics cards and bend them unnecessarily.
With this kit you can quickly, easily and securely connect your graphics cards, so you get the most optimal installation.
The tubes have an internal diameter of approx. 8mm, so you get plenty of water through them, and they can be used in all sales systems (High Flow, Push-On or Push-In)
The thread adapters have the universal 1/4" BSPP (G1/4) thread so they can be used in virtually all products with no problems.
These tubes can also be used between the pump and reservoir.
Specifications:
Material: Brass, Nickel plated - Polished Surface
Fitting Thread: Male 1/4" BSPP (G1/4)
Seal: Dual O-Ring
Max Pressure: 75 PSI/5 BAR
Space between GPU Water blocks from 39.2 to 50.6 mm
Packet content:
2 pcs thread adapters
1 pcs tube
Product code:
06XX042